20090122

How to Solve 6x6+ (on hi-games)

Let's start by saying that I don't really like the "grip shift" controls. Thus, the way I solve big cubes is designed to be somewhat fast (although I'm sure there are faster ways out there) while changing the grip as few times as possible. As it turns out, reduction is the best method for this.

Centers

Obviously, centers require lots of face turns, but also lots of slice turns. So how can we solve them with a small number of grip shifts? As it turns out, we can do a pretty decent job using U, F, D, B, and any r and l slices. Only build and insert rows on the x axis (faces U, F, D, and B), and although this uses a lot of cube rotations it isn't too restrictive. Besides, you can only see U and F anyway. So then the question is what slices we need. Here's how I do it:
6x6 and 7x7: shift both right and left in once. Now you can do all of the usual moves (3r, 3R, 2r, 3l, 3L, 2l) with each hand.
8x8 and 9x9: shift right in twice and left in once. The left hand can do 2l, 3l, 3L and the right hand can do 4r, 3r, 4R.
10x10: shift right in three times and left in once. The left hand can do 2l, 3l, 3L and the right hand can do 5r, 4r, 5R. Note that 4R is actually not possible (except by doing 4r y2 3l'), so you should try to work around this when building centers.

Note that in the cases where the right and left hands are asymmetrical, I really suggest pairing from the inside out, since slice moves are not always possible or convenient. The goal is to avoid cube rotations so you can spend all your time actually doing moves. As with other large cubes, by the way, I really suggest pairing up 1x(n-1) rows of centers, and putting them together as soon as they are done.

Edges

My method for edges is worse, but it still works pretty acceptably. The way I do this is to use the D slice to do slice moves and pair up edges on the E slice, since I tend to use the other slices to move edges around. Currently I use WO for moving the D slice in (up) and SL for moving it out (down), but you can use anything you want. Then I pair up edges multislice-style: I start by pairing up the innermost pieces, and then move out. Note that it's also possible to just use the L slice (and pair up edges on M), and use only RUDFB moves to insert edges, but personally this doesn't feel natural to me so I don't use it.

My method of pairing up 5x5-style edges is freeslice (the bigcubes.com) style, which means I pair up one edge group (of 3 pieces) at a time and don't fix centers until I have eight edges paired and out of the E slice. Since this normally requires U moves, I end up doing a LOT of z2 moves. As I said, this isn't the best way to pair up edges, but it works. Note that if you end up with a parity case you are better off temporarily moving the edges to the M slice, shifting R and L in by an appropriate amount, and doing the parity normally. This is possible because you don't need to do single-layer R and L turns.

So I pair up edges in two steps on 6x6 and 7x7, three steps on 8x8 and 9x9, and four steps on 10x10. On the last step, I just use the standard 5x5 pairing (which is on M), because if I have the right and left grips on the far outside of the cube I can do slice moves AND R and L turns.

3x3

The 3x3 stage is pretty standard, press space and just solve it normally. On even cubes there are parity issues to deal with. The way I do this is, for OLL parity, shift L and R in until the r and l slices turn half of the cube, and then the algorithm is:
r U2 x r U2 r U2 r' U2 l U2 r' U2 r U2 r' U2 r'
and for PLL parity, just shift R in so that the r slice is halfway, and then do:
z r2 z' r2 U2 r2 y2 L2 y2 U2 r2 z r2 z'.
There are a lot of cube rotations so it looks longer than it is, but it's still kinda slow.

So, good luck with bigcubes! Make sure to give each one a try, because for a lot of them you'll get on the top 100 list if you solve it, no matter how long it takes.

1 comment:

Konrad said...

I am a member of twistypuzzles.com. You might be as well.
I have come across a link to your discussion about big supercubes: http://michael-gottlieb.blogspot.com/2008/05/solving-4x4x4-and-5x5x5-supercubes.html
There you are using SIGN notation.
As this notation was not familiar to me at that time, I've tried to get a better understanding what the Pros and Cons are. Can you either post me as konsassen at the twistypuzzles forum or send email to konrad.sassen@gmail.com?
Regards Konrad
P.S. BTW, concluding from the German sound of your name, you may very well be German as I am. So, if there is further communication we can do it in German or English.